In this article we will talk about Tips To Prevent Fall and Slip Accidents, Trips and falls have happened to the best of us. From a momentary lapse of attention to the loud thud when your body hits the ground, everything is a blur when you’re experiencing a fall and slip accident. However, there is nothing blurry about the pain that follows such accidents.
Trip and fall accidents can lead to a number of regrettable events ranging from a serious injury to the shin to bruises and abrasions over the skin. According to the United States Department of Labour, slips, and trips make for a majority of all general industry accidents. These accidents lead to:
15 percent of all deaths per year
More than 25 percent of all injury claims in an year
More than 95 million days of work lost per year
In general fall and slip accidents, the primary cause is the loss of traction between the walking surfaceand the shoe. This loss of traction eventually leads to a fall and subsequent injuries. Floors that are often slippery due to spills or cleaning can be a leading cause for such accidents, including uneven payments as well.
Slip And Fall Accident Prevention
Tripping, slipping and falling accidents – rules of conduct
Everyone can contribute to the prevention of tripping, slipping and falling accidents and should deficiencies in workplaces and traffic routes, e.g. E.g. damaged foot racks, clutter, spilled liquids, general pollution, damaged footwear, slippery snow and ice, uncovered floor openings and other things, either remove them yourself immediately or report them to your supervisor.
Important is z. B. wearing safe footwear, controlling movement sequences and adapting walking speeds to local conditions.
Five tips against tripping and slipping
1- Wear the right shoes
The right work shoe helps you walk safely. Different shoes are suitable depending on the area of application. What they all have in common is a firm grip on the foot, a flat heel and a non-slip, non-slip sole.
There are now work shoes that, despite their functionality, are also optically trendy. Get tips from experts, for example the occupational safety specialist in your company.
2- Don’t underestimate stairs and steps
Stumbling on stairs and steps leads to more serious injuries than stumbling on a flat surface. That is why stairs and steps must always be clearly identified and illuminated. Use the handrail and be careful.
3- Eliminate tripping hazards and slipping areas
The edges of floor mats or carpet coverings should be clearly visible. Floor mats with a non-slip layer on the back provide more support. You should sort out mats with upturned corners or broken edges! It is best to secure transitions with firmly mounted carpet strips.
4- Keep your feet tidy
Beware of objects lying around. Always secure your workplace if it is in an area that is accessed by third parties. In your own interest, do not leave anything on the floor or water or oil stains on it. Tripping accidents often have very serious consequences at high workplaces such as scaffolding or work platforms.
5- Keep your eyes open
Observe your work environment! Sometimes tripping hazards develop slowly: Pavement slabs rise, a floor tile begins to wobble … If you want to protect yourself and your colleagues from tripping accidents, take action yourself or call the responsible contact person’s attention.
There are often simple but effective measures to avoid slipping and tripping hazards. Look for yourself:
Order and cleanliness in the workplace
Carelessness and general clutter are a common cause of slips and trips. Keep your work environment clean and tidy and make sure that floors and access routes are clear of obstacles. “Wild garbage dumps” emerge quickly once the beginning has been made. Therefore remove waste regularly.
cleaning and maintenance
Regular cleaning and maintenance minimizes risks. For example, oily or smeared floors and surfaces should be cleaned immediately. Make sure that cleaning and maintenance work does not create any new slipping or tripping hazards – for example, from standing work equipment or leaking cleaning fluids.
An obstacle or a leaked liquid can always be dangerous. In order to be able to see them at least until they are removed, good lighting, proper functioning and the correct position of light sources are important. Lighting may also be required outdoors if unfavorable weather conditions make workplaces or traffic routes too dark. The right light is the last step in avoiding tripping hazards.
Floors must be checked regularly for damage and repaired if necessary. Make your superiors aware of damage, because not everyone in charge can only pay attention to such things all day. Possible slipping and tripping hazards include holes, cracks, and loose carpets and mats.
It is also important that the floor surface is suitable for the work being carried out. If, for example, chemicals are used in production processes, the floor covering must be resistant to this.
The floor covering does not always have to be completely replaced. A coating or chemical treatment of existing floors can easily improve the slip resistance.
Many accidents happen on stairs. Handrails, non-slip coverings on steps, good visibility and non-slip markings on the front edge of steps and adequate lighting are the most important prerequisites for avoiding tripping, slipping and falling accidents on stairs. There are also other level differences such as B. Ramps. These are often difficult to see and must therefore be well marked.
Immediately remove leaked substances using a suitable cleaning method. Use warning signs where the ground is wet and create alternative routes. Check the result of the cleaning, chemical treatment may be necessary under certain circumstances.
Then ask the questions: “Why did something leak?”; “Can working methods or the workplace be changed to keep the leakage of substances to a minimum?” Avoiding leakage is usually easier and cheaper than always wiping afterwards.
Whenever possible, obstacles should be removed to prevent tripping accidents. But there is often the situation that an obstacle cannot be removed or cannot be removed immediately. In this case, suitable barriers and warning notices help to avoid accidents.
Tangled cables can be created quickly, but have no business being on the floor. Set up devices so that cables do not cross footpaths. If this is not possible, stow the cables under the cable covers and fasten them securely.
Footballers rarely play in sandals. A good job also includes the right footwear. Depending on the task and the environment, special requirements apply to the properties of the shoes. Pay attention to the floor surface, typical floor conditions and the slip resistance of your soles. Choose your shoes first according to the requirement, and only then according to their appearance.
There are special tripping and slipping hazards lurking outside, for example in the rain, on black ice or on construction sites. Here, too, the principle applies: First design the workplaces in such a way that there are no hazards at all.
Then take organizational measures – for example access regulations, barriers and warning notices, and in any case use suitable footwear.
It is better to prevent than to look back. Every accident that does not happen saves money, trouble and preserves your health.
How To Prevent Slips, Trips And Falls In The Workplace
How can you prevent slips and trips at work?
Whether you’re the chef in a busy kitchen or work in a warehouse, slips, trips and falls are the number one cause of accidents in all industries. In addition to following your workplace safety guidelines, there are a few additional things you can do as well. Here are some tips to help prevent slips and trips at work.
Identify possible dangers
The first step is to identify the most common causes of slips and trips. Tripping can occur if the foot gets caught on something. Therefore, watch out for obstacles such as loose cords, cables and ropes that are usually not visible.
This includes dirt, boxes, carpets, poor lighting, unmarked steps, and uneven surfaces that can often be overlooked.
Next, identify some slip hazards as the problem isn’t always blocked paths. Slipping can be the result of a loss of friction and traction in shoes. Liquids spilled on the floor, liquids that have not been cleaned properly, or even worn work shoes can also lead to slips and trips.
Once you have identified the hazards, you can take the appropriate safety measures and make everyone aware of them to ensure that the risk of slipping and tripping at work is minimized.
Take relevant action
Once you’ve identified where slips and pitfalls can occur, it’s time to put in place practices to make the workplace safer for everyone. A good starting point is to conduct a risk assessment and create documented guidelines for the workforce. Establishing a security protocol ensures that everyone is following the procedures.
The best way to create a safe environment is to keep the workplace clean, add non-slip mats, and encourage the use of non-slip shoes. These measures will reduce the likelihood of potential injuries.
ensure a clean workplace
The first step in maintaining a clean work environment is removing potential obstacles such as liquids. Basically anything that could affect you or your employees’ ability to work safely. Emphasis should be placed on cleaning equipment frequently and eliminating spills immediately, as a good cleaning routine can play an important role in preventing possible slips and trips at work.
Whether it’s oil in a kitchen, sawdust in a warehouse, or detergents in a hotel, cleaning quickly and thoroughly is essential to keeping a workplace safe. Here are some tips to help you keep your workspace safe and clean:
Keep floors and access routes clear of obstacles.
Remove the trash regularly to prevent it from building up.
During cleaning and maintenance, make sure that you do not create any new slipping or tripping hazards.
Clean up spills immediately using suitable methods.
If necessary, use warning signs, e.g. B. when the ground is wet.
Remove obstacles if possible. If you cannot, use relevant warning signs.
Make sure that the cables are covered or use cable bridges to secure them in place.
A clean workplace helps ensure the safety of employees, which reduces the likelihood of them being absent from work due to possible injuries.
Use safety signs and labels
Markings pass. It could be a step from the loading dock to the warehouse, or it could be clear liquids that may not be immediately visible. Bright, clear, and informative markings, signs, and labels can help prevent accidental slips and trips.
By marking these potential hazards, everyone is advised to avoid certain areas so that they can continue working safely. However, make sure the signs are also clearly marked so everyone knows what they mean.
wear safe shoes
One of the smartest ways to prevent slips and trips at work is to make sure you are wearing non-slip footwear that meets relevant shoe profile recommendations. To find a brand that takes the safety and effectiveness of their products seriously, look for slip test results.
When looking for shoes, consider whether the style you want is non-slip and has non-slip outsoles.
These give you the traction and support to stay safe and on your feet – even when the ground is wet. But don’t just stop there.
In addition to slip resistance, look for technology that eliminates potential tripping hazards and protects your feet from liquids.
Also, make sure the shoes are durable, comfortable, and easy to clean. Since slippery floors, falling objects, and tripping hazards can all lead to avoidable injuries, make sure your selection of non-slip shoes has the appropriate safety certifications.
Slips, Trips And Falls Injuries
Avoid SRS accidents – tripping, slipping, falling at work
SRS accidents and their consequences
Every two minutes someone slips, trips or falls in their work environment. You are just doing your usual activity and in the next second it happens: you slip or stumble. This happens so quickly that in most cases there is no response.
What often looks funny to outsiders and does not appear to be taken seriously can lead to serious health damage.
Often there are injuries to the ankle joint – strains and torn ligaments. It is not uncommon for broken bones to be the result of a fall or trip.
Depending on the severity of the fall, concussions can also occur. Each of these injuries results in several weeks of downtime and can lead to permanent discomfort.
Almost 5,000 accidents per year have such severe consequences that the person affected receives a BG pension because of permanent health problems.
Anyone who does not feel addressed by these dangers as a young person thinks wrong: Because SRS accidents do not only happen to the older generation – 20% of those affected in Germany are between 20 and 45 years of age.
Nobody is safe from tripping, slipping or falling – because dangers lurk in every work environment that can cause SRS accidents:
slippery or uneven floors
Cable runs on the floor
Stairs represent the greatest danger: According to the Federal Statistical Office, more people die as a result of falling stairs than in motorcycle accidents.
You can help reduce the risk of an SRS accident by having a decent workplace – but not every cause can be eliminated. You cannot avoid using stairs or walking over uneven floors. However, the right shoes can make a significant contribution to avoiding accidents caused by slipping.
Non-slip work shoes
Wear non-slip shoes at work to avoid SRS accidents – because the right footwear can save lives.
In order to be able to compare the measurements with one another, the so-called coefficient of friction is calculated: The division of the friction force by the specified vertical force with which the shoe is pressed onto the ground.
A coefficient of friction, which must be achieved as a minimum, was determined for each soil type and test condition. Our uvex safety or occupational shoes only receive the appropriate marking if this is achieved during the test.
Some of the tips that our readers can follow to prevent fall and slip accidents at home and at their workplace include:
Tips To Prevent Fall and Slip Accidents: Follow Good Housekeeping Practices
Good housekeeping is critical for limiting the cases of fall and slip accidents. If a facility has poor housekeeping techniques, where the floor isn’t cleaned and maintained in a routine manner, it will lead to a significant increase in slip accidents.
An organization that has clean and well organized facilities will see a decrease in slip and fall accidents, while another organization with poor facilities will see an increase in them.
Reduce Wet or Slipper Surfaces
Wet and slippery surfaces should be reduced to ensure as few chances of slip and fall accidents as possible. These injuries usually occur in the following areas:
Sidewalks (or lack thereof)
Food preparation areas
Shower stalls in residential dorms
Floors in general
Avoiding slippage in these areas can reduce such falls.
Wear Proper Shoes
Finally, it is up to the person themselves to prioritize their safety by wearing proper shoes. The shoes we wear play an integral role in minimizing the chances of slip and fall accidents. Make sure that you’re wearing proper shoes without any chances of slipping.
Fall Prevention Tips
COMMENTS: No Comments
Experienced Team With A Range Of Treatments Available. Book With Us Today!